Data Transmission explained
Data transmission is the conveyance of any kind of information from one space to another. Historically this could be done by courier, a chain of bonfires or semaphores, and later by Morse code over copper wires.
In recent web hosting terms, it means sending a stream of bits or bytes from one location to another using any number of technologies, such as copper wire, optical fiber, laser, radio, or infra-red light. Practical examples include moving data from one storage device to another and accessing a website, which involves data transfer from web servers to a user's browser.
A related concept to data transmission is the data transmission protocol used to make the data transfer legible. Current protocols favor packet based communication, which happend a lot between best web hosting companies.
Serial transmission bits are sent over a single wire individually. Whilst only one bit is sent at a time, high transfer rates are possible. This can be used over longer distances as a check digit or Parity bit can be sent along it easily.
Parallel transmission Multiple wires are used and transmit bits simultaneously and is much faster than Serial transmission as one byte can be sent rather than one bit. This method is used internally within the computer, for example the internal buses, and sometimes externally for such things as printers, however this method of transmission is only available over short distances as the signal will degrade and become unreadable, as there is more interference between many wires than between one.
Asynchronous transmission uses start and stop bits to signify the beginning and end of a transmission. This means that an 8 bit ASCII character would actually be transmitted using 10 bits e.g.: A "0100 0001" would become "1 0100 0001 0". The extra one (or zero depending on parity bit) at the start and end of the transmission tells the receiver first that a character is coming and secondly that the character has ended. This method of transmission is used when data is sent intermittently as opposed to in a solid stream. In the previous example the start and stop bits are in bold. The start and stop bits must be of opposite polarity. This allows the receiver to recognize when the second packet of information is being sent.
Synchronous transmission uses no start and stop bits but instead synchronizes transmission speeds at both the receiving and sending end of the transmission using clock signals built into each component. A continual stream of data is then sent between the two nodes. Due to there being no start and stop bits the data transfer rate is quicker although more errors will occur, as the clocks will eventually get out of sync, and the receiving device would have the wrong time that had been agreed in protocol for sending/receiving data, so some bytes could become corrupted (by losing bits). Ways to get around this problem include re-synchronization of the clocks and use of check digits to ensure the byte is correctly interpreted and received.
Protocol A protocol is an agreed-upon format for transmitting data between two devices e.g.: computer and printer. All communications between devices require that the devices agree on the format of the data. The set of rules defining a format is called a protocol.
The protocol determines the following:
Handshaking The process by which two devices initiate communications e.g.: a certain ASCII character or an interrupt signal/ request bus signal to the processor along the Control Bus. Handshaking begins when one device sends a message to another device indicating that it wants to establish a communications channel. The two devices then send several messages back and forth that enable them to agree on a communications protocol. Handshaking must occur before data transmission as it allows the protocol to be agreed.
In recent web hosting terms, it means sending a stream of bits or bytes from one location to another using any number of technologies, such as copper wire, optical fiber, laser, radio, or infra-red light. Practical examples include moving data from one storage device to another and accessing a website, which involves data transfer from web servers to a user's browser.
A related concept to data transmission is the data transmission protocol used to make the data transfer legible. Current protocols favor packet based communication, which happend a lot between best web hosting companies.
Types of data transmission
Serial transmission bits are sent over a single wire individually. Whilst only one bit is sent at a time, high transfer rates are possible. This can be used over longer distances as a check digit or Parity bit can be sent along it easily.
Parallel transmission Multiple wires are used and transmit bits simultaneously and is much faster than Serial transmission as one byte can be sent rather than one bit. This method is used internally within the computer, for example the internal buses, and sometimes externally for such things as printers, however this method of transmission is only available over short distances as the signal will degrade and become unreadable, as there is more interference between many wires than between one.
Asynchronous and synchronous data transmission
Asynchronous transmission uses start and stop bits to signify the beginning and end of a transmission. This means that an 8 bit ASCII character would actually be transmitted using 10 bits e.g.: A "0100 0001" would become "1 0100 0001 0". The extra one (or zero depending on parity bit) at the start and end of the transmission tells the receiver first that a character is coming and secondly that the character has ended. This method of transmission is used when data is sent intermittently as opposed to in a solid stream. In the previous example the start and stop bits are in bold. The start and stop bits must be of opposite polarity. This allows the receiver to recognize when the second packet of information is being sent.
Synchronous transmission uses no start and stop bits but instead synchronizes transmission speeds at both the receiving and sending end of the transmission using clock signals built into each component. A continual stream of data is then sent between the two nodes. Due to there being no start and stop bits the data transfer rate is quicker although more errors will occur, as the clocks will eventually get out of sync, and the receiving device would have the wrong time that had been agreed in protocol for sending/receiving data, so some bytes could become corrupted (by losing bits). Ways to get around this problem include re-synchronization of the clocks and use of check digits to ensure the byte is correctly interpreted and received.
Protocols and handshaking
Protocol A protocol is an agreed-upon format for transmitting data between two devices e.g.: computer and printer. All communications between devices require that the devices agree on the format of the data. The set of rules defining a format is called a protocol.
The protocol determines the following:
- the type of error checking to be used if any e.g.: Check digit (and what type/ what formula to be used)
- data compression method, if any e.g.: Zipped files if the file is large, like transfer across the Internet, LANs and WANs.
- how the sending device will indicate that it has finished sending a message, e.g.: in a Communications port a spare wire would be used, for serial (USB) transfer start and stop digits maybe used.
- how the receiving device will indicate that it has received a message
- rate of transmission (in baud or bit rate)
- whether transmission is to be synchronous or asynchronous
Handshaking The process by which two devices initiate communications e.g.: a certain ASCII character or an interrupt signal/ request bus signal to the processor along the Control Bus. Handshaking begins when one device sends a message to another device indicating that it wants to establish a communications channel. The two devices then send several messages back and forth that enable them to agree on a communications protocol. Handshaking must occur before data transmission as it allows the protocol to be agreed.
📣 Latest tweets mentioning Data Transmission
Imperva 🏆 Alexa 21,188▲ - 📅 - Customers around the globe trust Imperva to secure their critical applications, APIs, and data. Learn how our uniq… more info
XeonBD 🏆 Alexa 165,064▲ - 📅 - All the XeonBD's VPS configurations are now available from the USA data center location too. So, get your VPS fro… more info
Imperva 🏆 Alexa 21,188▲ - 📅 - Data is an organization's most valuable asset. But how do you protect it across diverse IT environments? Join our… more info
Nestify.io 🏆 Alexa 40,899▲ - 📅 - Data Protection in the Cloud: 5 Best Practice for Success #WordPress more info
Cloud.Google 🏆 Alexa 1 - 📅 - #WhereTheInternetLives: Hamina, Finland Press ▶️ to hear how Google has invested €2 billion in our Hamina data… more info
Aws.amazon 🏆 Alexa 8▲ - 📅 - Data is crucial when using AI for Good. Amazon CTO, @werner, opened the #AIforGood Summit with his keynote & l… more info
Atlantic.Net 🏆 Alexa 64,852▲ - 📅 - All data is NOT created equal. At more info, we offer industry-leading secure and compliant cloud ser… more info
📖 Latest blogs mentioning Data Transmission
🏆 Alexa 2,511,905▲ - 📅 - The Essential Guide to Single Mode Fiber Cables - Introduction In the realm of modern telecommunications, the backbone of high-speed data transmission lies in the use of optical fiber technology, particularly single mode fiber cables. These slender strands of glass or plastic are at the heart of ...
🏆 Alexa 239,829▲ - 📅 - VPN vs VDI: Discovering the Best Remote Access Solution - Key Takeaways VPN provides encrypted connections over the internet, ensuring secure remote access. VPN creates a secure tunnel between the user and the network, safeguarding data transmission. VPN pros include cost-effectiveness, easy setup, and ...
🏆 Alexa 2,511,905▲ - 📅 - Fiber Splicer First: Mastering the Art of Optical Connection - Introduction In the telecommunications sphere, optical fiber networks’ integrity and efficiency stand as crucial pillars. Central to these networks is the process of fiber splicing, carried out by a device named a fiber splicer. This technology is ...
🏆 Alexa 2,511,905▲ - 📅 - Understanding Fiber Innerducts: A Comprehensive Guide - Introduction In the telecommunications and data transmission sectors, fiber optic cabling is known for its high efficiency and capacity. These cables, made of delicate strands of glass or plastic fibers, face risks from physical, environmental, and ...
🏆 Alexa 2,511,905▲ - 📅 - Understanding Lit Fiber: A Comprehensive Guide - Introduction In the era of digital transformation, lit fiber stands as a pivotal element of contemporary connectivity frameworks, heralding unprecedented data transmission speeds and unwavering reliability. This surpasses the limitations of ...
🏆 Alexa 2,511,905▲ - 📅 - Fiber Optic Patch Panel: Enhancing Network Infrastructure - Introduction Optical fiber technology fundamentally transforms the telecommunications landscape by enabling rapid data transmission over extensive distances with negligible loss. Central to incorporating this advanced technology into network systems
🏆 Alexa 2,511,905▲ - 📅 - Ethernet over Fiber: Revolutionizing Digital Communication - Introduction to Ethernet over Fiber Ethernet over Fiber represents a transformative advancement in the realm of digital communication, seamlessly blending the time-tested reliability of Ethernet. This approach to data transmission harnesses the ...
📋 Latest news about Data Transmission
Nokia, Zayo Achieve Milestone in 800Gb/s Data Transmission - 📅 - Nokia and Zayo (zayo.com) (crunchbase.com) have accomplished a great achievement in high-speed data transfer by successfully completing a live field trial of Nokia's sixth-generation Photonic Service Engine super-coherent optics (PSE-6s). It would demonstrate a North American transmission record of 800Gb/s over a ...